I am obsessed with glass jars; whenever we buy salsa or jam or anything in a glass jar and it comes time to clean and toss that puppy out, I just can’t bring myself to do it. It’s resulted in a lot of weirdly shaped containers for things. Pairing that up with the awesome bulk bins at one of our grocery stores means that I have a great use for the jars. We live in an old house and the drawers are not constructed in a way that makes sense. If we pull the drawers out too far, they tip down and I’m always afraid they’ll fall out. One of those drawers has held a lot of the glass jars filled with dried goods. It’s a very heavy drawer and I was having a difficult time getting it open and closed. I decided I needed a shelf to store them. However, living in earthquake country means that I have to be careful.
I knew the internet would have ideas and I was right. I didn’t get the idea from just one source, but a few. I will try and source everything that I’ve found. We already have a shelf in our dining room, but when I tried to put the jars in the shelf, I discovered it was actually too deep, and it would be difficult to reach the back jars. I decided to go with a narrower shelf and happened to find just the right one at Target for about $17. It also happens to be the same brand as the current shelf I have, so they match. Winning!
I went to our local lumber yard and had them cut me some thin board, all of which cost me less than $2. They ended up being a bit too long but I was able to use my jigsaw to cut them to the right size. I sanded and then painted the boards using chalkboard paint (inspiration taken from here). Using my electric drill I made pilot holes in the shelf and then hammered the boards in (yeah, I could have used screws, they just intimidate me a little). I used three books to prop the boards up and make sure they were all evenly spaced. I wanted them to be high enough to keep the jars from tipping over, but low enough to still catch the shorter jars. I think I found a happy medium. There’s a lot of open space above the jars to allow me to reach to the back row and get the jars out.
In the above inspiration post I saw a lot of comments about keeping the jars from knocking into each other, as that would also break them. I didn’t really see any ideas that seemed economic or useful. Then it struck me, thick rubber bands. They would be stretchy enough to fit all the weird shapes, and also thick enough to create a band to write on. One of the issues with my jar system is that I could write on them but then inevitably I would grab the jar in the place where the writing was, effectively wiping off the writing. Some things are obvious, others are not. Now I could protect the jars while also labeling them. Yay! And I found some rubber bands at Staples for about $3. Two bags were more than enough for all my jars. Some of the jars needed more than one rubber band as they had protrusions that were still striking the other jars. Even still, those two bags have been enough.
Lastly, I will need to secure the shelf to the wall. It doesn’t to me a lot of good if the shelf can tip over. I know I need to find the studs in the walls and I have the worst time trying to find them using the knocking method. And so to the internet I went. Here’s what I found. Magnets? Genius. And it worked. And to secure it to the wall? How about this video? I haven’t actually done this part, but it seems pretty straight forward. I might even have all the supplies needed, but if not, it’ll be pretty easy to acquire the wire (haha) and take care of this step.
So here’s the (almost) finished product. Whoo hoo.
It’s nice when projects actually turn out the way I want.